5/8-11 Thread Chaser

Quantity: 1

$49.99

97-04 Corvette 5.7L Air Filter

Quantity: 1

$67.19

92-04 4.3L S-10/Blazer

Quantity: 1

$67.19

5/8 LH Steel Jam Nut - 3/4 Hex

Quantity: 3

$0.99

Oil Filter

Quantity: 2

$16.99

Air Filter

Quantity: 1

$117.59

Pit Mat 30in x 45in

Quantity: 1

$69.99

Throttle Stud Kit

Quantity: 2

$22.99

Order Total:
$1,981.02

5/8-11 Thread Chaser

Quantity: 1

$49.99

97-04 Corvette 5.7L Air Filter

Quantity: 1

$67.19

92-04 4.3L S-10/Blazer

Quantity: 1

$67.19

5/8 LH Steel Jam Nut - 3/4 Hex

Quantity: 3

$0.99

Oil Filter

Quantity: 2

$16.99

Air Filter

Quantity: 1

$117.59

Pit Mat 30in x 45in

Quantity: 1

$69.99

Throttle Stud Kit

Quantity: 2

$22.99

Order Total:
$1,981.02

Shop

Injen 13-18 Ford Focus ST L4 2.0L Turbo SES Intercooler Pipes Wrinkle Red

$422.60

Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
SES Intercooler Pipes, Part No. SES9002ICPWB, 2013-2018 Ford Focus ST L4-2.0L Turbo
Intercooler not included

  • NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • The increased flow allows for lower EGT’s and increased power numbers
  • Heavy Duty, Automotive grade couplers for strength and durability
  • Mandrel-bent Tubing for Increased Flow and smooth transitions
  • Manufactured from 2.50in lightweight 6061-T6 Aluminum Piping
  • Uses all factory mounting locations for simple installation
  • Includes all necessary hardware for a hassle-free install
  • Stainless Steel Band Clamps with Inner Protective Liner
  • Beaded Tube Ends for secure connections and fitment
  • Increase Throttle Response and Decreases Turbo Lag
  • Injen Technology Limited Lifetime warranty
  • Includes BOTH hot and cold side pipes
  • Available in three beautiful finishes
  • SES9002ICPWB Wrinkle Red finishes
  • Made in Pomona California, USA
  • SES9002ICPWR Wrinkle Black
  • SES9002ICP Polished

Click here to view the .pdf catalog, to click on your part.

In stock

Add To Cart
Quick Info SKU: 524376 Category:

Description

Injen Intercooler pipes are the next logical step in your search for power gains. The Injen staff has put in the time and work to develop parts that perform. These Intercooler pipes are no different, after investigating the OE piping, our engineers identified numerous areas where improvement was necessary. The Injen performance intercooler pipes are constructed of mandrel-bent aluminum piping that eliminates the rust buildup present in the most stock pipes. Injen’s Automotive Grade Silicone Couplers and Stainless Steel Band Clamp with Inner Protective Liner are also included in this kit. The Injen technology Silicone Couplers are on a new level. Compared to normal silicone, Injen Automotive Grade Silicone Couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of the couplers by preventing leaks and blowouts. The Injen Intercooler Pipe Kit is designed to work with the stock as well as the Injen performance intercooler. This Intercooler pipe performance kit, like all of our Injen performance parts, includes the Injen Limited Lifetime Warranty.
SES Intercooler Pipes, Part No. SES9002ICPWB, 2013-2018 Ford Focus ST L4-2.0L Turbo
Intercooler not included

  • NOTE: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
  • The increased flow allows for lower EGT’s and increased power numbers
  • Heavy Duty, Automotive grade couplers for strength and durability
  • Mandrel-bent Tubing for Increased Flow and smooth transitions
  • Manufactured from 2.50in lightweight 6061-T6 Aluminum Piping
  • Uses all factory mounting locations for simple installation
  • Includes all necessary hardware for a hassle-free install
  • Stainless Steel Band Clamps with Inner Protective Liner
  • Beaded Tube Ends for secure connections and fitment
  • Increase Throttle Response and Decreases Turbo Lag
  • Injen Technology Limited Lifetime warranty
  • Includes BOTH hot and cold side pipes
  • Available in three beautiful finishes
  • SES9002ICPWB Wrinkle Red finishes
  • Made in Pomona California, USA
  • SES9002ICPWR Wrinkle Black
  • SES9002ICP Polished

Fitment:
Ford Focus ST 2013
Ford Focus ST 2014
Ford Focus ST 2015
Ford Focus ST 2016
Ford Focus ST 2017
Ford Focus ST 2018

Additional information

Weight 9.7 kg
Dimensions 36.7 × 13.6 × 9 cm
air_freight_prohibited

false

not_carb_approved

true

carb_acknowledgement_required

true

ltl_freight_required

false

prop_65

Y

part_type

automotive

epa

N/A

regular_stock

t

upc

brand

part_number

SES9002ICPWR

Reviews

There are no reviews yet.

Be the first to review “Injen 13-18 Ford Focus ST L4 2.0L Turbo SES Intercooler Pipes Wrinkle Red”

Your email address will not be published. Required fields are marked *

Z Speed Shop

Z Speed Shop (Z Speed) is an innovative performance and race car part’s shop created by racers for racers. The primary goal of Z Speed is to offer the racer the best part for the right price and with speed! We want you on the track yesterday.

QUICK INFO

4761 Peytonsville Rd, Franklin, TN 37064 Monday-Friday: 9am to 5pm; Saturday : 10am to 2pm