Brake Light Switch

Quantity: 1

$11.99

NITRO SHOCK W/RED BOOT

Quantity: 1

$59.41

Electric Brake Shut Off

Quantity: 1

$197.57

Carb Spring Bracket

Quantity: 1

$6.49

Rear Spring 5in ID 13in Tall

Quantity: 1

$98.00

Quick Release Hub Weld On

Quantity: 1

$449.00

5.1in Open Cap - Stainless

Quantity: 1

$21.99

Throttle Return Spring Bracket

Quantity: 1

$4.49

Chrome Drier W/ Bracket

Quantity: 1

$111.99

Adj. Secondary Pump Cam Bracket

Quantity: 1

$38.37

#3 St. Bulkhead

Quantity: 1

$12.88

Trans Cooler Installatin Kit

Quantity: 1

$73.30

Mounting Bracket Set Series-6

Quantity: 1

$43.13

-10an Bulkhead Fitting

Quantity: 1

$33.40

Bolt In Bracket 7/16 Hole Pair

Quantity: 1

$13.99

Metering Rods - .062 x .052

Quantity: 1

$22.95

Ring Compressor 4.040

Quantity: 1

$59.99

Phenolic Adapter

Quantity: 1

$96.00

E-Brake Warning Indicatr Switch

Quantity: 1

$60.95

Order Total:
$4,135.77

Brake Light Switch

Quantity: 1

$11.99

NITRO SHOCK W/RED BOOT

Quantity: 1

$59.41

Electric Brake Shut Off

Quantity: 1

$197.57

Carb Spring Bracket

Quantity: 1

$6.49

Rear Spring 5in ID 13in Tall

Quantity: 1

$98.00

Quick Release Hub Weld On

Quantity: 1

$449.00

5.1in Open Cap - Stainless

Quantity: 1

$21.99

Throttle Return Spring Bracket

Quantity: 1

$4.49

Chrome Drier W/ Bracket

Quantity: 1

$111.99

Adj. Secondary Pump Cam Bracket

Quantity: 1

$38.37

#3 St. Bulkhead

Quantity: 1

$12.88

Trans Cooler Installatin Kit

Quantity: 1

$73.30

Mounting Bracket Set Series-6

Quantity: 1

$43.13

-10an Bulkhead Fitting

Quantity: 1

$33.40

Bolt In Bracket 7/16 Hole Pair

Quantity: 1

$13.99

Metering Rods - .062 x .052

Quantity: 1

$22.95

Ring Compressor 4.040

Quantity: 1

$59.99

Phenolic Adapter

Quantity: 1

$96.00

E-Brake Warning Indicatr Switch

Quantity: 1

$60.95

Order Total:
$4,135.77

Shop

DEI Heat Shroud 1in I.D. x 3ft – Aluminized Sleeving – Hook and Loop Edge

$49.49

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
One 36 inch length of Heat Shroud with a 1/2 to 1-1/2 inch inside diameter.
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length DO NOT apply directly to exhaust components.
Universal

  • Withstands 500 Degrees F Direct Continuous/2000 Degrees F Radiant Heat
  • Convenient Hook/Loop Closure Design
  • Reflects 90 Percent Of Radiant Heat
  • No Need To Remove Wires And Hoses
  • Easily Trim To Length
  • 1 in. X 3 ft.
  • Fireproof

Click here to view the .pdf catalog, to click on your part.

In stock

Add To Cart
Quick Info SKU: 519550 Category:

Description

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components.
One 36 inch length of Heat Shroud with a 1/2 to 1-1/2 inch inside diameter.
Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length DO NOT apply directly to exhaust components.
Universal

  • Withstands 500 Degrees F Direct Continuous/2000 Degrees F Radiant Heat
  • Convenient Hook/Loop Closure Design
  • Reflects 90 Percent Of Radiant Heat
  • No Need To Remove Wires And Hoses
  • Easily Trim To Length
  • 1 in. X 3 ft.
  • Fireproof

Additional information

Weight 0.33 kg
Dimensions 10.5 × 3.8 × 2.5 cm
air_freight_prohibited

false

not_carb_approved

false

ltl_freight_required

false

prop_65

Y

part_type

automotive

epa

N/A

carb_acknowledgement_required

false

regular_stock

t

upc

brand

part_number

10405

Reviews

There are no reviews yet.

Be the first to review “DEI Heat Shroud 1in I.D. x 3ft – Aluminized Sleeving – Hook and Loop Edge”

Your email address will not be published. Required fields are marked *

Z Speed Shop

Z Speed Shop (Z Speed) is an innovative performance and race car part’s shop created by racers for racers. The primary goal of Z Speed is to offer the racer the best part for the right price and with speed! We want you on the track yesterday.

QUICK INFO

4761 Peytonsville Rd, Franklin, TN 37064 Monday-Friday: 9am to 5pm; Saturday : 10am to 2pm